The ETH-SP is engineered to protect any Power-over-Ethernet (PoE) or non-PoE device with connection speeds of up to 1 Gbps...

GESP New revision of Gigabit Ethernet Surge Protector in IP67 waterproof enclosure GESP is Gigabit Ethernet Surge Protector that can be used to protect the network from lightning or surge damages. Here’s what a typical use-case would be like. You have a mast with some antennas. And some switches on the ground. Put the GESP surge protectors o..

GESP+POE-IN GESP+PoE is a passive PoE injector with surge protection. Combine it with the GESP devices for maximum security and peace of mind...

UTP passive PoE adapter kit, 0.15 m - Perfect for use with IP-cameras - Transfers power and data over single Ethernet cable - Plug and Play: no installation or configuration required - This passive Power over Ethernet injector + splitter adapter kit is an ideal solution to supply e.g. your IP Camera with power and data without adding an ext..

PoE Adapters are highly reliable, and when used with Ubiquiti TOUGHCable, they provide earth grounding and surge protection to help protect against electrostatic discharge (ESD) events. - POE-24-24W-G has a Gigabit LAN port - 24VDC @ 1A Ubiquiti PoE Adapters provide a variety of features to help protect your PoE devices: • Surge protection ..

PoE Adapters are highly reliable, and when used with Ubiquiti TOUGHCable™, they provide earth grounding and surge protection to help protect against electrostatic discharge (ESD) events. - 50VDC @ 1.2A..

The new MikroTik Gigabit PoE adapter for powering any RouterBOARD over Gigabit Ethernet. Simply connect your power source and then use an ethernet cable to connect the injector to the RouterBOARD device. Helps reducing number of wires that lead up the tower. For using with any RouterBOARD that supports 9-48V PoE. The GPOE has shielded connectors..

Low-cost passive PoE base unit for powering passive PoE devices over ethernet. Simply connect your power source to the injector, and then use an ethernet cable to connect the injector to the RouterBOARD device. Helps reducing number of wires that lead up the tower, and in other situations. For using with RouterBOARDS that support 10-28V PoE poweri..

The ePoE technology of Dahua adopts advanced 2D-PAM3 coding modulation from physical layer, and realizes full duplex transmission over 800 meters at the speed of 10Mbps, or 300 meters at the speed of 100Mbps via Cat5 or coaxial cable media. Dahua ePoE technology offer a new way to accomplish long distance transmission between IP camera and network ..

This device lets you use any 48V PoE source (including Passive PoE, Telecom PoE, 802.3af and 802.3at) to power RouterBOARD devices. Simply plug any 48V PoE powered ethernet cable into one port, and any 8-30V capable RouterBOARD device into the other. This device is capable to provide high power output - up to 24W (up to 1A at 24V). You can power ..

- Support passive PoE cascade power supply and Ethernet data exchange - Support IEEE 802.3af/at standard power supply IP Camera - Cooperating with High PoE Midspan (TAM01GT01GT-75W), able to cascade level 2 PoE Extender, connect to 3 IPC (power consumption..

PoE+ Midspan > Supports IEEE802.3af, IEEE802.3at standard > Conform IEEE802.3, IEEE802.3u and IEEE802.3ab standards Ethernet Port: 1*10/100/1000 Base-T, 1*10/100/1000 Base-T( PoE power supply) Power output ≤30W PoE Protocol: IEEE802.3af, IEEE802.3at Power AC100~240V 50/60Hz Working Temperature -10°C~55°C Weight 250g Dimension: 132.3mm×60..

PoE Adapters are highly reliable, and when used with Ubiquiti TOUGHCable™, they provide earth grounding and surge protection to help protect against electrostatic discharge (ESD) events. - 48VDC @ 0.5A..

PoE Adapters are highly reliable, and when used with Ubiquiti TOUGHCable, they provide earth grounding and surge protection to help protect against electrostatic discharge (ESD) events. - POE-48-24W-G has a Gigabit LAN port - 48VDC @ 0.5A Ubiquiti PoE Adapters provide a variety of features to help protect your PoE devices: • Surge protectio..

The GPEN11 is a power injector that can be mounted on a wall, and will power your uplink devices with PoE power. The GPEN11 is part of the GPEN (Gigabit Passive Ethernet Network) concept, which aims to replace GPON installations with lower cost and more easy to deploy ethernet alternative...