Hood for MotionProtect Outdoor protects sensors of the anti-masking system from rain and snow. Mounting method: Dual Lock tape Material: Polycarbonate Operating temperature range: From -25°? to +60°? Operating humidity: Up to 100% Dimensions: 110 × 96 × 90 mm Weight: 71 g..

The BRACKET C set of wall brackets is designed for mounting the outdoor detectors: OPAL, OPAL Plus, OPAL Pro and AOD-200. The set consists of two types: ball-joint bracket and angle bracket. The ball-joint bracket offers the swiveling vertical range of 60° and the horizontal swiveling range of 90°. This makes it easier to find the optimal position ..

The BRACKET C set of wall brackets is designed for mounting the outdoor detectors: OPAL, OPAL Plus, OPAL Pro and AOD-200. The set consists of two types: ball-joint bracket and angle bracket. The ball-joint bracket offers the swiveling vertical range of 60° and the horizontal swiveling range of 90°. This makes it easier to find the optimal position ..

BRACKED D is a holder for mounting selected SLIM LINE motion detectors as well as APD-200 and APMD-250 models. The detector lead-in cable can be run through the inside of the holder to make the system safer and more aesthetically pleasing...

The AGD-200 detector is designed to detect the breaking of panes of regular, tempered and laminated glass. For detection, it uses advanced dual-path signal analysis. Sensitivity of its built-in microphone can be adjusted. The device works as part of the ABAX 2/ABAX two-way wireless system...

Motion detector, whose function is to detect an intruder moving within the system protected area. Owing to its pet immunity, the MPD-300 can provide protection even if small animals, such as small dogs or cats, are moving in its coverage range at the time of supervision. A lithium battery used to power the device ensures many years of work without ..

Digital PIR motion detector •fully digital algorithm •replaceable Fresnel lens with sealed optics •digital temperature compensation •pre-alarm feature •adjustable mounting bracket included..

Ceiling mount digital PIR - fully digital detection - 360° lens - digital temperature compensation - pre-alarm feature..

The APD-200 detector is designed for operation as part of the ABAX 2/ABAX two-way wireless system. It meets the EN 50131 requirements for Grade 2. Effective motion detection is achieved thanks to the double pyro-element, digital detection algorithm and dynamic compensation of temperature in protected premises. APD-200 has a state-of-the-art lens w..

The compact and slim enclosures of the AGATE curtain detector contain advanced technological solutions which enable a virtual wall to be created both outside of the protected buildings as well as in their interiors. Design of the AGATE detector meets the EN 50131-2-4 standard requirements for Grade 3. Therefore, the device can be used to secure th..

Elegant, slim enclosure is made of high quality plastic. Uniform appearance of all detectors installed in the premises makes it difficult for an intruder to identify the specific model used in the system because all of them look the same. - compliance with EN 50131 Grade 3 - configuring operating parameters: buttons and keyfob - end-of-line ..

Elegant, slim enclosure is made of high quality plastic. Uniform appearance of all detectors installed in the premises makes it difficult for an intruder to identify the specific model used in the system because all of them look the same. compliance with EN 50131 Grade 2 configuring operating parameters: potentiometers end-of-line resistors -..

- High-performance sensor, intelligent and accurate detection of gas leakage, and send out alarm signal timely - Operate stably and identify gas type effectively - Intelligent linkage to close pipeline valve and start exhausting fan - 1 valve output, 1 relay output - A built-in high-volume buzzer, 70dB (A) at 1m (3.28 feet) - Three indica..

- Split-spectrum sensor technology - Test and hush features in one single button - Loud sound output over 85 dB(A) at 3 meters - Low quiescent current consumption - Surface-mount device (SMD) circuit board design - Low battery warning signal - Battery Life: 10 year, 3V CR123A lithium battery (replaceable) - TÜV and CE listed, EN 14604..

The TSD-1 is a point detector designed to detect the early stages of a developing fire. For this purpose, it is equipped with a photoelectric sensor of visible smoke, as well as rate of rise temperature sensor. The unique design of the measuring chamber provides high sensitivity and omni-directionality, while a precise Hexamesh stainless steel filt..